The BM 2200/65 BOMAG planer has a 58-inch milling radius. The milling machine's conveyor discharges at 16 feet with a slewing angle of 130 degrees—65 degrees in either direction...
Powered by a 355-horsepower John Deere engine, model W 120 Fi Wirtgen milling machine has a 4-foot milling drum. It can mill to 300 mm. Mill Assist, when set on automatic, adapts...
The BM 1200/35-2 BOMAG milling machine has a 350-horsepower engine. It mills up to 164 fpm and has a transport speed of 410 fpm. It has three milling drum speeds: 85, 95, and ...
Caterpillar PM620, PM622, PM820, PM822, and PM825 half-lane milling machine updates include expanded LED lighting, integrated Cat Grade with Grade and Slope system, and improved...
Wirtgen W 220 Fi and W 250 Fi milling machines have a maximum milling depth of 14 inches. The W 220 Fi is equipped with a two-speed Dual Shift powershift transmission, and the...
BOMAG BM 2500/75 cold planer is the company’s largest. The 771-horsepower BM 2500/75 is a four-track unit that incorporates a mechanical drum drive for the 98.4-inch-wide (half...
The 140.8-horsepower BOMAG BM 500/15-2 and BM 600/15-2 milling machines work to widths of 19.7 and 23.6 inches, respectively, and both have a minimum radius of 9.6 inches. The...
The 600-horsepower BOMAG 2200/60 milling machine has an 86.3-inch cutting width and use the BMS 15 milling tooth holder system. The tapered tooth retainer claw boasts a low-resistance...
Caterpillar half-lane cold planers now meet Tier 4-F emission standards with the Cat C18 800.6-horsepower diesel. This includes models PM620, PM622, PM820, PM822 and PM825 milling...
Frank Raczon, Senior EditorSuperior Construction of Portage, Ind., has retrofit a milling machine with a 3D laser grade control system to mill asphalt 6 inches down on 4,348 feet...
Frank Raczon, Senior EditorThe market for milling machines is on the upswing, not because of hope for a magical federal infrastructure package, but because of local efforts to...
Walt Moore, EditorThe Occupational Health and Safety Administration (OSHA), in June, 2016, issued a Final Rule regarding occupational exposure to respirable crystalline silica...
Frank Raczon, Senior EditorThings are looking up for the milling machine market and manufacturers continue to invest in technology to make cold planing more efficient and cost...
Frank Raczon, Senior EditorWith an aging infrastructure and increased use of recycled asphalt pavement (RAP), milling machines continue to be solid market performers, despite ...