In 1948, a one-man job shop was established on a farm in central Iowa. The man behind it? Gary Vermeer. The second, and now third generations have transformed the company into a global supplier.
Model D550 Vermeer horizontal directional drill has an thrust/pullback of of 550,000 pounds and torque of 100,000 lb.-ft.The Vermeer D550 controls have three different auto drilling...
The AX17 Vermeer brush chipper weighs about 10,000 pounds and is powered by a 130 horsepower Cummins Tier 4-F diesel engineIt has a 26-inch drum with two knives, horizontal offset...
Vermeer VXT300 truck-mounted vacuum excavator has an 8-cubic-yard spoil tank, 6-inch dig tube, and can carry up to 800 gallons of water.The next-generation upgrade replaces the...
Sponsored Multiquip's Juan Quiros displays the newest products in the company's lineup at World of Concrete 2013, including the new Rammax RX1575 Trench Roller.
Editors’note: This article has been updated since it was originally published in 2019. Content was provided by Vermeer.Key takeaways How hole count affects cost. Key variables...
Vermeer is expanding its pile driver product line with the PD5R and PD5 pile drivers. The 15-foot mast can remain fully assembled when transporting, and it has a 90-degree rotating...
Vermeer TR6450 trommel screen sorts up to three product sizes at once. It has adjustable front-fines, rear-fines, and overs conveyor.Its quick-change tension screen drum is 20...
The PD5 Vermeer pile driver has a 15-foot mast that can remain fully assembled when transporting and aided by a 90-degree rotating platform. Model PD5R features remote control...
The TR5300EM Vermeer trommel screen has a 60-horsepower electric motor that delivers a drum speed of 0 to 24 rpm. The low hopper infeed can handle up to 5.5 cubic yards.The TR5300EM...
The Vermeer TR6400 trommel screen separates up to 180 cubic yards of material per hour with 0.5-inch screens working with material with less than 40 percent moisture content.It...
The CTX160 compact track loader has been added to Vermeer’s line of minis. It has a rated operating capacity (ROC) of 1,600 pounds. Operating weight is 4,000 pounds.The Vermeer...
Vermeer PTX42 walk-beside plow/trencher has a maximum plow depth of 24 inches, and the trencher goes 42 inches deep and 6 inches wide. It is powered by a 46.8-horsepower Kubota...
Vermeer XR2 vacuum excavator has a shaker deck to separate liquids and solids, allowing the user to discharge the solid material and pump slurry water into holding tanks for disposal...
The Vermeer D23x30DR S3 horizontal directional drill has an operating weight of 16,500 pounds and thrust/pullback of 24,000 pounds. Firestick dual-rod technology allows 7-percent...
The Vermeer SC382 stump cutter has a redesigned cutter wheel and is powered by a 37-horsepower EFI Briggs & Stratton Vanguard engine. With optimized tooth placement, the company...
The BC1500 brush chipper is now available with a gas engine, a 165-horsepower PSI engine that the company says delivers comparable chipping productivity as its diesel counterpart...
Vermeer has expanded its line of utility-installation equipment with the new compact Vermeer D8x12 horizontal directional drill, sized for working in tight spaces (fits through...
The Vermeer mini skid steer model S925TX has a tipping capacity of 2,643 pounds, a rated operating capacity of 925 pounds, and maximum hinge pin height reach of 84.5 inches. It...
The S925TX mini skid steer has a tip capacity of 2,643 pounds, a rated operating capacity of 925 pounds, and maximum hinge pin height reach of 84.5 inches.It features a radial...
The D40x55DR S3 HDD features Vermeer dual rod technology that uses an inner rod to provide torque to the drill bit, while the outer rod offers steering capability and rotation...
The D8x12 HDD is designed for small service installations, including gas distribution, power, water, and telecommunication networks.It is equipped with two drill rod options and...
The SPX25 vibratory plow is designed for cable/fiber and irrigation system installation.It features a full-function remote control that eliminates the need to run the tracked ...
The TR5300 trommel screen is equipped with a 74-horsepower Deutz TD 2.9L Tier 4-F engine. The new screen has a chain-driven drum with speed to 24 rpm. Changing product sizing ...
The WC2500TX tracked wood chipper has a 600-horsepower Tier 4-F engine that enables it to handle whole trees. It comes with either a microchip drum, which produces chip sizes ...
Vermeer’s Silver Series drill rod is composed of S135 common grade steel and is threaded in the same facility as the company’s Firestick drill rod with the same column wall thickness...
The Vermeer CTX100 mini skid steer has a tipping capacity of 2,958 pounds and a rated operating capacity of 1,035 pounds. The vertical lift loader measures 36 inches wide on 7...
The compact D10x15 S3 Navigator horizontal direction drill replaces the D9x13 S3 Navigator. A 60-horsepower Deutz TD2.9 Tier 4-Final engine has 36 percent more power.Also increased...
The CTX100 mini compact track loader uses vertical-lift boom arms to provide a tipping capacity of 2,958 pounds and a rated operating capacity of 1,035 pounds. The unit has 7-...
The T1255III Terrain Leveler has a patented tilt-head milling attachment with top-down cutting action that can dig up to 21 inches deep and 144 inches wide. The teeth on top of...
The 135-horsepower BC1200XL brush chipper has a 4.3-liter EFI gas engine that provides 23 percent more horsepower than the diesel version. It handles limbs up to 12 inches in ...
The D60x90 S3 horizontal directional drill has 60,000 pounds of thrust/pullback and 9,000 lb.-ft. of rotational torque. The 202-horsepower Caterpillar engine is Tier 4-Final. ...
The D24x40 Navigator horizontal directional drill has 28,000 pounds of thrust and pullback and 4,200 lb.-ft. of rotational torque. Sound has been reduced to 104 dB(A) with an ...
The D40x55 S3 Navigator horizontal directional drill has 40,000 pounds of thrust/pullback and 5500 lb.-ft. of rotational torque, more than 10 percent more than its predecessor...
The FT100 forestry tractor (pictured at bottom) has an above-ground mulcher attachment with a ringed rotor that measures 18 inches in diameter and has 18 disks and 17 tip mounts...
The PTX40 walk-beside service plow, with optional trencher, has a minimum width of 40.2 inches and is 84.8 inches long. It has a remote control that is tethered when trenching...
The D23x30 S3 Navigator horizontal directional drill has 24,000 pounds of thrust and pullback and 3,000 lb.-ft. of rotational torque, more than the predecessor D20x22 Series II...
The CTX50 mini skid steer from Vermeer features vertical-lift boom arms, which keep the load closer to the machine during lifting and thus increase lift capacity, says the company...
The VX30-300 vacuum excavator weighs 9,999 pounds with a 300-gallon spoil tank. A 31-horsepower Yanmar diesel powers the unit. A hydraulic door enables quick dumping and cleaning...
The D100x140 Navigator hydraulic directional drill has been upgraded with a Tier 4-Final, 275-horsepower Cat diesel. The directional drill has 100,000 pounds of thrust/pullback...
The D20x22 S3 Navigator hydraulic directional drill has 19,550 pounds of thrust/pullback with 2,200 lb.-ft. of torque. The 74-horsepower Deutz engine is Tier 4-Final compliant...
The S800TX mini skid steer is available with a 40-horsepower Kubota EFI gasoline engine the delivers 88.5 lb.-ft. of torque. The S800TX has an 840-pound operating capacity with...
Vermeer has added to its RTX line of rubber-track trenchers with the RTX450, powered by a 49-horsepower Tier 4-Final engine.The RTX450 is the smallest ride-on utility tractor ...
Vermeer has introduced its first horizontal directional drill with a Tier 4-Final engine, the D9x13 S3 Navigator HDD.Touted as the first of the company's S3 generation of drills...
The Vermeer D220x300 Navigator HDD has 242,100 pounds of thrust/pullback and 30,200 lb.-ft. of rotational torque.It has a 37-foot length and 8.5-foot width. According to Vermeer...
Vermeer BC1000XL brush chipper now has an 89-horsepower GM Industrial 3.0L gas engine option with an electronic fuel injection (EFI) system.A direct electronic pressure regulator...
SC30TX stump cutter has a 27-horsepower Kohler electronic fuel injection (EFI) gas engine. Its horizontal shaft design allows for easier access and maintenance due to the elimination...
Vermeer RTX250 rubber-tracked, steerable trencher has a 27-horsepower Kohler electronic fuel injected gas engine. The trencher digs 8-inch-wide trenches up to 48 inches deep. ...
Vermeer S450TX mini skid steer loader has a 500-pound operating capacity with 1,430-pound tipping capacity. Kubota 24.8-horsepower diesel or Kohler EFI 27-horsepower gasoline ...
The T1655 terrain leveler surface excavation machine weights 200 tons and stands 22 feet high. It is 44 feet long and 21 feet wide, specifically designed for precision surface...
Vermeer BC900XL wood chipper chip heavily branched material up to 9 inches in diameter. The feed opening is 9 x 14 inches, and its 33-inch-diameter disc rotates at 1,400 rpm. ...
Vermeer D20x22FX Series II flex-angle drill is designed specifically to assist with geothermal field loop installations. Unit can drill at any specified angle ranging from 18 ...
The MTR12 and MTR16 microtrenching attachments offer maximum cutting depths of 12 and 16 inches respectively, and depth control is mechanically adjusted in 1-inch increments...
SA400 mud pump is powered by a 350-horsepower Cat Tier 4-I engine and has a pump capacity up to 435.3 gpm. The stand-alone pump features an engine-mounted lubrication pump to ...
D100x140 Navigator HDD replaces the 100X120 and is designed for water, sewer and gas pipeline applications. A Cat 275-horsepower engine produces 100,000 pounds of thrust/pullback...
D36X50DR Series ll features a rod-in-rod design that provides 1,500 ft.-lb. of rotational torque. As the inner rod powers the downhole tri-cone, the outer rod provides steering...
The D36X50R MAGnum magnetic hammer drilling system uses rapidly rotating magnets of alternating polarity within the carriage assembly to create a high frequency percussive action...
D60x90 Navigator horizontal directional drill is powered by a Deere Tier 4-I 185-horsepower engine, supplying 9,000 ft.-lb. of rotational torque and 60,000 pounds of thrust/pullback...
Vermeer has redesigned its HG6000 horizontal grinder, updating to a Tier 4-I engine. Cat C18 diesel produces 755 horsepower, up 20 percent over the previous model. Production ...
RTX150 walk-behind trencher has a 20-horsepower Kohler gas engine and digs to 36 inches. Machine can use tires or tracks, and tracks oscillate up to 20 degrees for traction on...
New to the Allen Engineering range of Mechanical Super Pro riding trowels is the MSP 445. The new trowel uses a 40-horsepower Kohler gas engine (air-cooled) and a refined torque...
Vermeer now offers its BC1000XL brush chipper with two diesel engine options: a 49-horsepower Cat C2.2L Tier 4a, or an 85-horsepower Cummins B3.3 Tier 3.
Vermeer’s fuel chip attachment converts the company’s HG6000 or HG6000TX horizontal grinder cutting drum from a ripper/shredder to a chipper. The attachment requires approximately...
With the increased emphasis on wind energy, there’s work to be done for underground transmission-line installation contractors. And, as always, there’s no time to waste, even ...
The addition of the new Vermeer CL80 attachment can turn one of the company's Commander track tractors into a cable layer specifically meeting the challenges of installing wind...
Designed for wood-wasted recycling, the Vermeer HG6000E electric-powered horizontal grinder is powered by two electrical motors producing 600-horsepower. To maximize productivity...
A pit-launched, laser-guided tool to install 10- to 14-inch-diameter pipe, the AXIS boring system from Vermeer offers underground contractors a new option for trenchless installation...
With relatively no break-over point providing full tractive power to all four tracks, the quad-track system on Vermeer's underground installation machines further offers maneuverability...
Vermeer designed the SC1152 and SC652 stump cutters with a unique four-bar linkage that allows the cutter wheel to move away from the machine as the boom drops down toward the...
Available as a center-mount option for the RT950 utility trencher tractor or the RTX1250 quad-track or rubber-tired tractors, Vermeer’s new hydrostatic wide-cut rockwheel attachment...
With the intuitive VZ Steer system, minimal operator effort is required to control the direction of the new Vermeer RTX100 pedestrian trencher. When the machine’s in motion, the...
A self-propelled compost turner that utilizes patented elevating-face technology, the Vermeer CT1010TX can process between 2,500 and 4,000 cubic yards of compost per hour, depending...
To enhance plowing performance in muddy, loose or hard-pan soil conditions, Vermeer has introduced a steel-track version of its 120-horsepower quad-track utility trencher tractor...
The RTX750 is the newest addition to Vermeer’s utility installation product lineup to feature the quad-track system, designed to maximize tractive effort and stability by maintaining...
With a mill-box opening measuring 50 inches high by 71.5 inches wide, the Vermeer HG8000 horizontal grinder can process a higher volume of raw and grind materials usually reserved...
With the ability to maneuver around land-clearing jobsites without the need for additional support equipment, the self-propelled Vermeer HG400TX horizontal grinder can be controlled...
The design of Vermeer’s newest stump cutter reduces the need to reposition the entire unit during cutting operations. A four-position linkage design allows the SC852’s cutter ...
With its newest horizontal grinder model, Vermeer has eliminated the need for additional support equipment to maneuver this large processing machine around land-clearing and composting...
Operating a horizontal directional drill traditionally means exposing a few workers to the full brunt of outdoor conditions. Well, with its D330x500 Navigator, Vermeer offers ...
Formerly only with rubber tires, Vermeer's 120-hp ride-on trencher is also available with a quad-track design that maximizes traction and stability by maintaining four-point ground...
Vermeer S400TX mini skid-steer has a 23-hp Kohler gas engine and easy-to-operate controls. Two joysticks are integrated within a hand-grip bar and control transport and boom/bucket...
Vermeer D20x22 Series II Navigator horizontal directional drill provides 2,200 ft.-lb. of torque and 20,000 lb. of thrust/pullback. An 83-hp Kubota turbocharged diesel powers ...
McLaughlin engineers and manufactures for Vermeer the industry’s first trailer-mounted combination air-and-water vacuum excavator, the V300AWSD, providing contractors with one...
The all-new TG5000 tub grinder features a 60-inch-deep and 12-foot-wide tub opening. Vermeer says the bottom of the tub flares outward from the tub wall, allowing the hammermill...