The B-Air 185-12 Atlas Copy air compressor is electric that delivers up to 174 psi and a stable flow rate up to 190 cfm. It can work up to a full 8-hour shift.
A line of 30 heavy-duty high-capacity dewatering pumps includes the addition of three high-flow models to the PAS range of centrifugal dry prime pumps.
Three walk-behind power trowels—the BG 245, BG 375 and BG 475—include upgraded features, Atlas Copco says, that enhance versatility and safety on a variety of applications, from...
The PowerROC T45 surface drill has a telescoping boom and drills holes from 3 to 5 inches in diameter. It has an RD 22S hydraulic drill and 370-cfm air compressor. Power Eco allows...
The DM30 II fill the gap between some larger and smaller drill rigs in the range. The DM30 II has a 30-foot drill pipe changer and a standard 4-rod carousel; total depth capacity...
Three plate compactors— LF60, LF75, and LF100—feature vibration-reduction handles and are lightweight for operation on soil and asphalt applications.The units’ rounded plate design...
The BC 2500 and BC 3700 bucket crushers process about 80 percent more material due to their hydraulic drive system, the company says.The BC 2500 fits 24-ton to 33-ton carrier ...
The CA1400 soil roller features a 66-inch-wide drum and two amplitudes—.032 inches and .067 inches—allowing users to compact a wide range of materials.Using the adjustable settings...
FlexiROC T15 R surface drill is a rubber-tired, four-wheel-drive unit for rough terrain. It drills 1- to 2-inch-diameter blastholes. It has a 2.4-Hz Bluetooth radio remote control...
The HiLight V4 and the LED HiLight V5+ light towers are lightweight, compact and feature the company’s exclusive HardHat canopy for rugged applications such as construction and...
The LP6505 walk-behind duplex roller is redesigned with flip-up hoods that provide easy access to all service points, aiding engine maintenance and battery charging.The previously...
Essential Case-Mounted (EC) range of hydraulic breaker attachments has expanded with the addition of five Small Range breakers to the lineup.The breakers are small enough, Atlas...
Atlas Copco Smart pokers are designed to eliminate air voids in concrete.The pokers have a radius of action that is 12 times the diameter of the poker heads rather than the standard...
The compact, single-beam BV30 vibrating screed allows contractors to level concrete in a variety of applications, including garage floors and driveways, as well as in confined...
Atlas Copco has added three hydraulic breaker attachments to its Essential Case-Mounted (EC) range to fit 22- to 49-ton carriers.The Heavy Range breaker attachments are the EC...
At 6 inches wide, the LT5005 rammer is 3 inches smaller than its predecessor and the LT6005 is 9 inches wide, 2 inches shorter than the previous model.These designs enable operators...
Mobile surface drill rig, named Easer, can boxhole bore and downream to 29 inches in diameter, as well as perform conventional raiseboring to 47 inches in diameter. It can drill...
The Atlas Copco load/haul/dump (LHD) Scooptram models—ST7, ST1030, and ST14—are now available with an optional side-dump bucket, which, says the company, increases the versatility...
SmartROC T35 and T40 surface drill rigs are now available with a radio remote-control system that enables the drill to be operated either from the cabin or from “a safe distance...
Atlas Copco has introduced the next generation in their Secoroc COP line of down-the-hole hammers.The COP 66 is shorter, lighter and easier to operate than its predecessors, and...
FlexiROC T45 tophammer surface drill features the COP 3060 rock drill and replaces the ROC F9. During operation, the operator can adjust the airflow and the dust collector fan...
The Hydro Magnet, designed to separate iron and steel from concrete waste for subsequent recycling, can be installed on a carrier with an existing uni-directional auxiliary circuit...
Atlas Copco’s Dynapac CT3000 tamping compactor is designed for large-volume work on cohesive and semi-cohesive soils. With an operating weight of 25 tons and an average production...
The QAC 1200 generator features a Cummins QST30G5 diesel engine that is Tier 2 certified and provides an 1140 kVA/912 kW prime power rating (60 Hz).With this electronically governed...
Atlas Copco has added a line of BC bucket crushers to its silent demolition tool range of hydraulic attachments.Rig-mounted bucket crushers solve job site waste management issues...
FlexiROC T30 R radio remote-control tophammer drill rig comes with either a COP 1240 or 1640 drill for 2- to 3.5-inch holes. The standard hydraulic carousel-type rod handling ...
Atlas Copco has completed its post driver range with the addition of the lightweight LPD-LD. The fifth model in a family of drivers, the LPD-LD weighs 39 pounds. The company now...
PowerROC T35 E surface drill rig is an extandable-boom version of Atlas Copco’s T35 rig. An aluminum feed systems allows the rig to drill straighter holes than in previous models...
A new range of ride-on trowels from Atlas Copco feature mechanical drive for constant torque at any rotor speed, a throttle pedal that adjusts the speed of the dual rotors, and...
Direct communication with the rig control system of the SmartROC D65 drill is now possible through a computer network instead of a USB memory stick. The drill can download data...
The T2W-III is Atlas Copco’s single-engine rig for rotary and down-the-hole (DTH) drilling in the 30,000-pound class. It is designed for both air and mud applications, and ships...