Models DL200-7, DL220-7, and DL250-7 Doosan wheel loaders are Dash 7 upgrades that have redesigned cabs, increased bucket capacities, and new fuel-saving technologies. They replace Dash 5 models.
Each Doosan Dash 7 Series wheel loader can be equipped with an optional Transparent Bucket.
Additional Dash 7 technologies include:
- The Doosan Smart Guidance System analyzes operator driving habits and provides tips on the Doosan Smart Touch display during operation to increase efficiency.
- An improved Load Isolation System improves wheel loader stability while moving, which can reduce cycle times, increase productivity and boost fuel efficiency.
- The new Doosan Smart Load weighing system tells the operator the weight of material in the bucket. All menus and settings are integrated into the Doosan Smart Touch screen.
- The Doosan Smart Key is a key fob that can unlock the cab and allow push-button engine starting.
The Doosan DL200-7 wheel loader has a hydrostatic drive system, and a traction control management system allows operators to adjust traction force to match job site conditions. Traction modes include Max, for maximum traction force; traction control, which offers three levels of reduced traction forces; and S-mode, for operating on slippery roadway conditions.
Doosan DL200-7 Wheel Loader Specs
- Power: 142 hp
- Operating weight: 26,599 lb.
- Bucket capacity: 2.6 cu. yd.
- Static tipping load, full turn: 19,705 lb.
- Dump height: 9 ft. 1 in.
- Dump reach, 45 degrees: 3 ft. 4 in.
Doosan DL220-7 Wheel Loader Specs
- Power: 160 hp
- Operating weight: 29,098 lb.
- Bucket capacity: 3.0 cu. yd.
- Static tipping load, full turn: 20,461 lb.
- Dump height: 9 ft. 3 in.
- Dump reach, 45 degrees: 3 ft. 6 in.
Doosan DL250-7 Wheel Loader Specs
- Power: 172 hp
- Operating weight: 30,528 lb.
- Bucket capacity: 3.3 cu. yd.
- Static tipping load, full turn: 21,134 lb.
- Dump height: 9 ft. 3 in.
- Dump reach, 45 degrees: 3 ft. 6 in.