Equipment Type

Vermeer SPX25 Vibratory Plow

The SPX25 vibratory plow is designed for cable/fiber and irrigation system installation.

October 12, 2017
The SPX25 vibratory plow is designed for cable/fiber and irrigation system installation.

The SPX25 vibratory plow is designed for cable/fiber and irrigation system installation.

It features a full-function remote control that eliminates the need to run the tracked unit from behind and allows the operator a 360-degree view of the job site. The tracked unit is 34.5 inches wide for maneuverability inside gates. It is powered by a 25-horsepower Kohler gas engine and can install small pipes and cables at depths up to 12 inches, as well as bore underneath driveways and sidewalks using the optional Porta Bore attachment. The dual rubber tracks have a ground pressure of 3.7 psi for flotation in soft ground conditions. Transport speed is 3.7 mph.

recent articles on Vibratory Plows

other Vermeer Corporation products

The S925TX mini skid steer has a tip capacity of 2,643 pounds, a rated operating capacity of 925 pounds, and maximum hinge pin height reach of 84.5 inches.

The S925TX mini skid steer has a tip capacity of 2,643 pounds, a rated operating capacity of 925 pounds, and maximum hinge pin height reach of 84.5 inches.

The D40x55DR S3 HDD features Vermeer dual rod technology that uses an inner rod to provide torque to the drill bit, while the outer rod offers steering capability and rotation torque for reaming.

The D40x55DR S3 HDD features Vermeer dual rod technology that uses an inner rod to provide torque to the drill bit, while the outer rod offers steering capability and rotation torque for reaming.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init