Equipment Type

Vermeer

The design of Vermeer’s newest stump cutter reduces the need to reposition the entire unit during cutting operations.

May 01, 2008

The design of Vermeer’s newest stump cutter reduces the need to reposition the entire unit during cutting operations. A four-position linkage design allows the SC852’s cutter wheel to move away from the machine as the boom drops down toward the stump. At the same time, the cutter wheel guard remains parallel with the ground, so it does not limit movement over obstacles. Powered by a turbocharged Cummins Tier-3 engine generating 85 horsepower, the Vermeer SC852 produces 224 foot-pounds of torque, and is capable of cutting heights of 31 inches above and 25 inches below grade. The straight-line cutting width at ground level is 72 inches. A machine width of 35 inches provides the SC852 with a compact footprint for maneuverability on confined jobsites.

recent articles on Wood and brush clearing

other Vermeer Corporation products

The D8x12 HDD is designed for small service installations, including gas distribution, power, water, and telecommunication networks.

The D8x12 HDD is designed for small service installations, including gas distribution, power, water, and telecommunication networks.

The SPX25 vibratory plow is designed for cable/fiber and irrigation system installation.

The SPX25 vibratory plow is designed for cable/fiber and irrigation system installation.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init