Equipment Type

Parker

Parker Hannifin ParMax 761 series hydraulic hose offers a constant working pressure of 8,000 psi. An inner tube made of oil-resistant synthetic rubber and six spiral plies of high-tensile steel-wire reinforcement enable the hose to handle high pressures.

November 01, 2006

Parker Hannifin ParMax 761 hydraulic hoseParker Hannifin ParMax 761 series hydraulic hose offers a constant working pressure of 8,000 psi. An inner tube made of oil-resistant synthetic rubber and six spiral plies of high-tensile steel-wire reinforcement enable the hose to handle high pressures. No-Skive design eliminates the need to remove the cover before crimping, the company says. Read a copy of the bulletin

recent articles on Hydraulic Hose

  • The BM3 multicoupling plate is designed to allow operators to simultaneously connect and disconnect large-diameter lines that contain residual pressure.

    The BM3 multicoupling plate is designed to allow operators to simultaneously connect and disconnect large-diameter lines that contain residual pressure.

  • The H.E.C. (hose end chamber) couples to the end of the hydraulic hose after uncoupling from the power source.

    The H.E.C. (hose end chamber) couples to the end of the hydraulic hose after uncoupling from the power source.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init