Equipment Type

Miller Electric

Miller Electric’s Trailblazer 302 Air Pak is a self-contained power source that welds at up to 350 amps, provides 13,000 watts of Accu-Rated generator power and 26 cubic feet per minute of compressed air at 100-percent duty cycle.

April 01, 2009

Miller Electric Trailblazer 302 Air Pak gasoline-engine-driven welderMiller Electric’s Trailblazer 302 Air Pak is a self-contained welding power source that welds at up to 350 amps, provides 13,000 watts of Accu-Rated generator power and 26 cubic feet per minute of compressed air at 100-percent duty cycle. The rotary-screw compressor delivers 70 to 160 pounds per square inch of air with no storage tank. It runs most air impact wrenches with the engine at idle, and is capable of working with ¼-inch carbons. Miller says there is enough power and air pressure to run its full line of portable Spectrum plasma cutters with a rated cut of 5/8 inch. A 30-horsepower Kohler gas engine powers the Trailblazer 302 Air Pak. Miller says it occupies up to 50 percent less truck space and up to 25 percent less axle weight compared to using a welder and separate engine-driven air compressor.

recent articles on Welding Equipment, Electrical

other Miller Electric Mfg. Co. products

Miller Electric Bobcat 200 Air Pak delivers compressed air, generator power, battery charging/cranking assist, and stick welding capabilities

Unit measures 47 inches long, 20 inches wide, and 24 inches high

The Big Blue 600 Air Pak welder/generator is designed for field-based work that requires single-operator power for welding, carbon arc gouging, auxiliary power, or running an air compressor to perform repair and maintenance functions.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init