Equipment Type

Husqvarna Dry Cutting Vac Attachment

Husqvarna has developed a dry cutting vac attachment for its MS 360 masonry saw (available in both gas and electric versions).

October 10, 2017
Husqvarna has developed a dry cutting vac attachment for its MS 360 masonry saw (available in both gas and electric versions).

Husqvarna has developed a dry cutting vac attachment for its MS 360 masonry saw (available in both gas and electric versions).

Contractors can now make dry cuts cleanly because the attachment enables dust to be collected the moment it is created and pulled into a vacuum. The attachment affixes to the conveyor cart by lining up two pins to two holes on the conveyor cart. A dust trough fits in the groove on the cart to catch and remove dust produced while cutting. It almost completely surrounds the blade and can be adjusted for different material sizes. Once attached to the conveyor cart, the MS 360 Vac Attachment is then connected to a 250 cfm or more vacuum equipped with a HEPA filter, such as a the Husqvarna S 26 or S 36, to meet OSHA silica regulations.

recent articles on Dust Collection Systems

The DC 200 drum cutter, a new attachment for the DXR demolition robot product line, is made for surface profiling rock or concrete, trenching, excavating frozen soil, soft rock excavation in quarries, demolition, and dredging.

The PP 490 power pack is designed to power almost all of the company’s Prime high-frequency product range as well as the Husqvarna WS 482 HF wall saw, including when the wall saw is used with the CS 10 wire saw.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
CE-Dust Collection Systems
Overlay Init