Genie S-60 and S-65 Trax telescopic boom aerial lifts feature four-point track system that is permanently attached onto the machine.
Genie S-60 and S-65 Trax telescopic boom aerial lifts feature four-point track system that is permanently attached onto the machine. A profile of 8 feet 6 inches allows them to be transported without oversize load permits. Inside turning radius is 11 feet, and outside radius is 21 feet. Travel speed is 2.7 mph. Each steel-reinforced rubber track measures 17 inches wide and 40 inches long with ground contact pressure of 9.2 psi for the S-60 and 9.7 psi for the S-65.
The X430AJ telescoping boom aerial work platform has a stowed width of 2 feet 5 inches.
The 1500AJP telescoping-boom aerial work platform reaches to 75 feet
The SX-135XC telescopic boom lift provides full platform height of 135 feet with outreach to 90 feet and has unrestricted lift capacity of 660 pounds.
Fuel-electric Z-60/37FE articulating boom aerial work platform has two modes of operation
Genie aerial lift products have been fixtures on the Long Harbour Process Plant site from the...
Aerial-work-platform sales have grown enough to accommodate manufacturers competing for niche...
Add comment