Equipment Type

Gallery of Compact Telehandlers

February 01, 2008

'Super Compact' Arrives on Scene

Described by JLG as its "super compact" telehandler, the new G5-18A was rolled out in December 2007. With a maximum lifting capacity of 5,500 pounds, the G5-18A has a 1,850-pound lift capacity at the fully extended forward reach of nearly 11 feet. Powered by an 84-horsepower Perkins diesel engine, the telehandler combines hydrostatic transmission, four-wheel drive, and a choice of three steering modes for a minimum turning radius of 126 inches. Beyond machine specifications, JLG focused on operator comfort and extended service intervals in the design of the new machine.

Number of models: 2

New model: G5-18A

Product-line features: As does the new G5-18A, the 100-horsepower G5-19A that debuted in early 2006 offers single joystick operation with proportional controls. The G5-19A offers slightly less rated lifting capacity, at 5,000 pounds, but with a maximum lift height of 19 feet.

Telehandler Uses Bob-Tach System

The fourth and most compact model in the Bobcat VersaHandler product line, the 75-horsepower V417 was introduced in late 2007. Offering maximum load capacity of 4,400 pounds and maximum lift height of 17 feet, the V417 is the first of what Bobcat calls its telescopic tool carriers to offer the Bob-Tach attachment mounting system, bringing Bobcat's heritage in compact machine technology to a telescopic boom. Select attachments for Bobcat large-frame skid-steer loaders, compact track loaders and all-wheel-steer loaders are approved for the V417's use.

Number of models: 2

New model: V417 VersaHandler

Product-line features: The V417 VersaHandler is joined in the sub-6,000-pound class by the V518, offering maximum load capacity of 5,000 pounds and lift height of 18 feet 2 inches in a 100-horsepower package. Both models feature heavy-duty hydrostatic ground drive for shifting on the fly between high- and low-drive-speed ranges. Dynamic braking and the ability to inch are integrated.

Two Different Series Offer Compact Choices

With three different series of machines, Gehl offers a broad range of telescopic handlers for construction, industrial and agricultural needs. Even in the sub-6,000-pound market, two different series of Gehl machines provide a solution. Along with the CT5-16 and CT5-16 Turbo models established as part of the CT Series of "ground-engaging" compact telescopic loaders, Gehl kicked off 2007 with the introduction of a new, low-profile, sub-6,000-pound entry from the core RS Series of lift-and-carry machines. Measuring 76 inches in height, the RS5-19 offers 5,500 pounds of lift capacity and 19 feet 1 inch of lift height.

Number of models: 3

New model: RS5-19

Product-line features: Be it via the RS or CT series of machines, Gehl offers maneuverability for compact-telescopic-handler customers. The CT5-16, with 5,000 pounds of lift capacity and 16 feet 2 inches of lift height, similarly has a turning radius of less than 11 feet and overall height of less than 7 feet.

Redesigned Model Arrives This Quarter

To launch early in 2008, the redesigned GTH-5519 enhances Genie's lifting performance and serviceability in the compact telehandler market. Available with either a 63-horsepower Deutz or Perkins engine (with a Tier 3 Deutz available in the first quarter), the GTH-5519 offers 5,500 pounds of load capacity with maximum lift height of 18 feet 10 inches. A low stowed height of 76 inches and turning radius of 132 inches allows the machine to maneuver tight jobsites and, at just under 10,000 pounds, the GTH-5519 can be towed by a heavy-duty truck.

Number of models: 1

Product-line features: A hydraulic quick-attach system allows for the fast swapping of the most-needed attachments from the cab. Auxiliary hydraulics plumbed at the boom tip can utilize proportional and directional flow control.

Compacts Call on Maniscopic Design

As part of its Maniscopic product line, Manitou North America offers two versions of its compact "rough-terrain truck" with a lift capacity of 5,000 pounds, lift height of 16 feet 2 inches, and maximum forward reach of 9 feet 7 inches. The open-cab MT 523 has a naturally aspirated, 58-horsepower Perkins engine, while the enclosed-cab MLT 523 MU is powered by a turbocharged, 63-horsepower Perkins and is operated by a "Mono Ultra" joystick. At a width of 71 inches and height of 79 inches, the Manitou compact telehandler has a 122-inch turning radius.

Number of models: 2

Product-line features: With a ground clearance of 12 inches, the compact 523 Series is designed for rough terrain. The two versions are identical in appearance to the larger members of the Maniscopic product family.

A New Market for Caterpillar's Reach

A new model for which initial shipments are expected in late February, the Caterpillar TH255 telehandler features a rugged two-section boom providing 18 feet of lift height and 5,500 pounds of rated load capacity for construction, landscaping and industrial applications. At a width of 71.5 inches, tool-face-to-rear length of 144 inches and height of 75.6 inches, the TH255's compact dimensions and low profile provide the operator with all-around visibility. With a turning radius of 126 inches, the TH255 maneuvers in tight access areas by use of crab, circle and two-wheel steer mode options.

Number of models: 1

New model: TH255

Product-line features: The first Caterpillar model for the sub-6,000-pound-capacity telehandler market, the TH255 has a side-mounted engine and mid-mounted cab to ensurebalanced weight distribution. Power is provided by a mechanically-fuel-injected Cat C4.4 Tier III DIT engine generating 84 horsepower.

Dieci-Made Telehandlers Available Here

The newest "low-boom" telescopic handler branded and distributed by Xtreme Manufacturing, the XRM5.519 was introduced to the North American market at World of Concrete 2007. With a lift capacity of 5,500 pounds and lift height of 19 feet, it is the smallest of 11 different telehandler models offered by Xtreme via a strategic alliance with Italian equipment manufacturer Dieci. The XRM5.519 is powered by a 71-horsepower Yanmar engine, and it measures 75 inches in height with a turning radius of 134 inches.

Number of models: 2

New model: XRM5.519

Product-line features: As with the new XRM5.519 model, the 5,700-pound-capacity XRM5.720 comes with an open ROPS cab as standard, but offers a closed, sound-proof, ROPS/FOPS cab with air conditioning as an option.

This Mustang Gallops Everywhere

With the early 2007 introduction of the 519, Mustang moved into the compact-telehandler market. Offering maximum lift capacity of 5,500 pounds with 19 feet 1 inch of lift height, the Mustang 519 measures 148 inches in length, 71 inches in width and 76 inches in height, and can be transported on a trailer behind a one-ton truck. It has a turning radius of 132 inches and can fit under a finished doorway. Powered by a 64-horsepower Deutz engine, the two-speed 519 can travel at up to 15 miles per hour.

Number of models: 1

New model: 519

Product-line features: As with all Mustang telehandlers, the new compact 519 can be operated in either of two-wheel, four-wheel or crab steering modes.

Loadall Offering Reaches Compact Market

When it comes to compact telescopic handlers, JCB offers among the most compact of machines on the market. Providing maximum lift capacities of 4,000 pounds each, the 520-40 and 520-50 Loadalls have maximum lift heights of 13 feet 2 inches and 16 feet 5 inches, respectively; the latter is enhanced by a four-speed synchronized transmission. Also with a lift height of 16 feet 5 inches, the 524-50 model offers a maximum lift capacity of 5,000 pounds and was recently updated with the introduction of the JCB engine. As with the 420-40, it has a two-speed hydrostatic transmission.

Number of models: 3

Product-line features: All JCB compact telehandlers have the ability to pick up various attachments with their integrated-tool-carrier quick hitches. With the 520-40 model, an optional skid-steer quick-attach additionally allows the most compact JCB Loadall to compete directly against large skid-steers, but with the added lift height.

Comments on: "Gallery of Compact Telehandlers"

Overlay Init