EDGE Post Pounder and Puller

April 27, 2011

EDGE post pounder and puller from CEAttachments is for use on skid steer loaders to install and remove steel or wood posts. Designed for use by one person, the attachment will drive posts as wide as 10 inches and up to 10 feet long with 50,000 pounds of impact force. Pole is positioned using 12-inch plumb chain, and use the power of the skid steer will drive it, even as low as 18 inches above ground, the company says. The attachment will also pull old posts, small trees, or steel posts from 1-inch in diameter out of the ground.

EDGE post pounder and puller from CEAttachments is for use on skid steer loaders to install and remove steel or wood posts. Designed for use by one person, the attachment will drive posts as wide as 10 inches and up to 10 feet long with 50,000 pounds of impact force. Pole is positioned using 12-inch plumb chain, and use the power of the skid steer will drive it, even as low as 18 inches above ground, the company says. The attachment will also pull old posts, small trees, or steel posts from 1-inch in diameter out of the ground. An optional T-Post Adapter Kit is for use in driving or pulling T-Posts. It requires a minimum of 15 gpm hydraulic flow and is recommended for use on a skid steer with a minimum lift capacity of 1650 pounds.