Equipment Type

Doosan DL200TC Tool Carrier

Doosan DL200TC tool carrier has parallel-lift linkage system, providing visibility down the center of the arms. Linkage also keeps the work tool flat as it is lifted.

April 27, 2011

Doosan DL200TC tool carrier has parallel-lift linkage system, providing visibility down the center of the arms. Linkage also keeps the work tool flat as it is lifted. Powered by a Tier 3, 143-horsepower Doosan engine, the loader has an operating weight of 25,708 pounds with a standard 2.6-cubic-yard bucket. Dump height is 8 feet 11 inches with a dump reach of 3 feet 1 inch. Bucket breakout force is 23,149 pounds with a pin-on bucket; static tipping load is 18,913 pounds with a straight frame and 16,272 pounds at the maximum steering angle of 40 degrees. A quick coupler is optional.

recent articles on Toolcarriers

The DL220-5 wheel loader replaces the Dash 3 and has a 160-horsepower Doosan DL06 engine that complies with Tier 4 regulations.

The Doosan line of severe-duty buckets for crawler excavators is approved for use on the DX140LC-5 through DX530LC-5 models.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init