The Caterpillar Performance Series flat-floor bucket is designed specifically for Cat M and K Series small wheel loaders.
The Caterpillar Performance Series flat-floor bucket is designed specifically for Cat M and K Series small wheel loaders.
The new flat-floor buckets are general-purpose buckets that incorporate a specially designed long floor and a rear cutting edge for light grading or back-dragging. The buckets also feature curved side bars to promote an aggressive cut, as well as better rollover, and also incorporate a wide-throat design for easier loading and increased fill factors, Cat says. The long-floor models also work well with laser control during forward grading, and the rear cutting edge is designed to leave a quality finish when back-dragging. The buckets are available in rated capacities from 3.0 to 3.8 cubic yards and with a choice of interfaces—pin-on, Fusion coupler, or ISO.
The RB72, RB84, and RB96 roll-out buckets are optimized for G Series CTLs and K Series compact wheel loaders (RB84 and RB96 only), with an additional 34 inches of dump reach when fully extended.
A 90-inch Light Material High-Capacity Bucket (LM90) has joined the lineup of Worksite Pro attachments.
The 248-horsepower 814K wheel dozer has an operating weight of 48,390 pounds.
B-Prefix hydraulic hammers, available in B4(s) and B6(s) silenced and B4 and B6 non-silenced versions, are designed for "plug-and-play" operation with a range of compact equipment, such as skid steer loaders, multi-terrain loaders, compact track loaders, mini hydraulic excavators (3- to 8-ton operating weights), and backhoe loaders.
Understanding backhoe-loaders' weight distribution and setup options can make them the most...
The hydraulic-thumb mounting structure on every Caterpillar E-Series backhoe-loader is just one...
Add comment