Equipment Type

Vermeer HG6000 Horizontal Grinder

Vermeer has redesigned its HG6000 horizontal grinder, updating to a Tier 4-I engine.

June 30, 2011

Vermeer has redesigned its HG6000 horizontal grinder, updating to a Tier 4-I engine. Cat C18 diesel produces 755 horsepower, up 20 percent over the previous model. Production and throughput can be adjusted through a dual-screen system that allows users to mix and match screens, reverse or change screens, and adjust the screen support in accordance with material type and requirements. The transition area between anvil and screen has been eliminated, boosting screen area by 20 percent. The Series II duplex drum hammermill consists of 10 hammers and 20 cutter blocks with a 36.4-inch cutter tip diameter and 62-inch cutting width. A single-piece 48-inch wide belly and discharge conveyor belt eliminates the transition point from belly to load-out.

recent articles on Horizontal Grinder

other Vermeer Corporation products

The S925TX mini skid steer has a tip capacity of 2,643 pounds, a rated operating capacity of 925 pounds, and maximum hinge pin height reach of 84.5 inches.

The S925TX mini skid steer has a tip capacity of 2,643 pounds, a rated operating capacity of 925 pounds, and maximum hinge pin height reach of 84.5 inches.

The D40x55DR S3 HDD features Vermeer dual rod technology that uses an inner rod to provide torque to the drill bit, while the outer rod offers steering capability and rotation torque for reaming.

The D40x55DR S3 HDD features Vermeer dual rod technology that uses an inner rod to provide torque to the drill bit, while the outer rod offers steering capability and rotation torque for reaming.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init