Equipment Type

Morbark Tub Grinders

Morbark's range of six tub grinders encompasses units from the 157-hp Model 950, to the Model 1500 with 1,050 horsepower...

September 01, 2005

1200XLMorbark's range of six tub grinders encompasses units from the 157-hp Model 950, to the Model 1500 with 1,050 horsepower. The Model 1200XL, shown here, has horsepower choices ranging from 600 to 760, from either Caterpillar or Cummins, and features a direct-drive system for the hammer mill with a torque-limiting mechanism that protects against shock loads. Weighing 63,940 pounds, the 1200XL has a hammer-mill opening of 32×52 inches and uses a dual-auger-to-belt discharge system. A tub cover for debris containment is standard equipment.

recent articles on Tub Grinders

  • Morbark combines heavy-duty construction and new technology in the 1300B tracked tub grinder

  • The all-new TG5000 tub grinder features a 60-inch-deep and 12-foot-wide tub opening. Vermeer says the bottom of the tub flares outward from the tub wall, allowing the hammermill to cut under the vertical wall of the tub, helping to reduce bridging and permitting steady feeding of material.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
CE-Paving & Materials Production,CE-Tub Grinders
Overlay Init