Equipment Type

Link-Belt RTC-80130 Series II Crane

Link-Belt says the RTC-80130 Series II 130-ton crane is the largest rough-terrain model it has ever produced. The crane uses a five-section, 162-foot formed boom that is constructed of extra-high-tensile steel and has one double-acting, single-stage hydraulic cylinder with integrated holding valves. Five boom modes vary the extension of the telescoping sections, and wear pads with Teflon insert...

December 01, 2008

 

Link-Belt RTC-80130 Series II Crane

Link-Belt says the RTC-80130 Series II 130-ton crane is the largest rough-terrain model it has ever produced. The crane uses a five-section, 162-foot formed boom that is constructed of extra-high-tensile steel and has one double-acting, single-stage hydraulic cylinder with integrated holding valves. Five boom modes vary the extension of the telescoping sections, and wear pads with Teflon inserts self-lubricate the boom sections. Maximum boom tip height is 171 feet. The unit can be transported in two loads.

The 48,900-pound 210 X4 excavator delivers up to 9 percent faster cycles times than its predecessor, according to the manufacturer.

Link-Belt Excavators X4 series have Isuzu Tier 4-Final engines that provide up to 12 percent improved fuel efficiency, using SCR technology.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init