Pro-Cut Plasma Cutting Systems (Pro-Cut 25, Pro-Cut 55 and Pro-Cut 80) are designed to cut any conductive material, the company says.
Pro-Cut Plasma Cutting Systems (Pro-Cut 25, Pro-Cut 55 and Pro-Cut 80) are designed to cut any conductive material, the company says. These systems incorporate the patented Vortech-Technology torch, which concentrates the arc. The Pro-Cut 25 weighs 29.5 pounds, generates 25 amps of cutting power and can cut 3/8-inch-thick materials. The Pro-Cut 55, weighing 55 pounds, generates 60 amps of power and can cut 3/4-inch materials. The Pro-Cut 80, weighing 95 pounds, has 85 amps of cutting power and can slice through 1 1/4-inch materials.
Renegade ET 300iP DC TIG/Stick inverter, which features controls for pulsed TIG welding and high frequency or Lift TIG arc starts options, produces a top output of 300 amps at 40 percent duty cycle.
Miller Electric has enhanced its ArcReach technology with two capabilities: 1) provide automatic compensation for voltage drop in the weld cable; and 2) allow welding operators to adjust parameters while welding.
Lincoln Electric has been selected welding supplier for a new Discovery Channel series titled...
With a $1 million...
The crew at the West Coast Customs garage will exclusively use welding equipment and consumables...
Add comment