Vacuum dust collection system uses the same air compressor as the concrete dowel drill to effectively collect dust directly from the drilled holes and store it in a collector.
Customers can purchase the Dust Collection System with any E-Z Drill model or retrofit it onto existing units. E-Z Drill designed the system with a dust boot that mounts to the end of the bit guide, where the bit penetrates the concrete. This allows the vacuum system to take in dust at the closest point possible, maximizing the amount of dust the system captures and reducing operator exposure. The system also prevents dust from blowing into nearby water during bridge repairs. Each unit features either a 600- or 900-millimeter filter to trap dust particles.