Equipment Type

Chicago Pneumatic

Rivet busters from Chicago Pneumatic are designed for concrete breaking and metal cutting.

December 01, 2008

Chicago Pneumatic concrete breaking toolsRivet busters from Chicago Pneumatic are designed for concrete breaking and metal cutting. CP 4608 and CP 4611 have 8-inch and 11-inch tool strokes, respectively, and require 45 cfm of air to operate. Controlled Power System (CPS) prevents blank firing when a unit’s rubber bumper is 75 percent worn, which extends equipment life and avoids unexpected downtime, the company says. When the bumper is worn, the outward movement of the upper and lower sleeves opens bleeding ports for air, causing the piston to stop in its lower position. An indicator groove on the lower sleeve shows when its bumbers should be replaced.

Chicago Pneumatic CPG 25 and CPG 45 generators are available in skid-mount and trailer-mount configurations and are lighter weight than the previous versions.

Chicago Pneumatic MV 58A vibratory plate compactor is for use on thin asphalt layers, small repairs, and road maintenance work.

The MV 58A forward asphalt plate compactor is designed for compaction of thin asphalt layers, small repairs, and road maintenance work.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init