Equipment Type

Atlas Copco SmartROC D60

The SmartROC D60 drill produces holes from 4.5 to 7 inches in diameter.

March 02, 2016

The SmartROC D60 surface drill produces holes from 4.5 to 7 inches in diameter. The drill has been updated with Hole Navigation System and auto positioning that precisely locates holes, then accurately collars and drills them to the required depth and inclination, the company says.

The feed has built-in sensors in its rod-handling cylinders and carousel motor to handle 16.5-foot drill steel. A 475-horsepower Cat C15 engine works along with the control of compressor load and engine rpm for fuel economy.

The SmartROC T45 hammer drill rig has a site-navigation system based on the Global Navigation Satellite System (GNSS).

Scooptram EST1030 is an electric underground loader with an 11-ton capacity.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
CE-Surface drills,CE-Top 100,CE-2016,CE-Heavy Earthmoving
Overlay Init