Equipment Type

Carlson Adds CP75 Paver to Lineup

The CP75 asphalt paver has a hopper capacity of 8 tons.

July 09, 2015

The CP75 asphalt paver has a hopper capacity of 8 tons. Powered by a 74-horsepower Cummins Tier 4-Interim diesel, the unit is paired with a 2-speed planetary drive. The paver has screen-mounted controls and direct-connect cable steering. Analog readouts provide engine monitoring and diagnostic information.

One-piece forward-tilting hood, along with an access panel in the hopper, provides accessibility to the engine compartment and hydraulics. Remote greasing stations and accessible tension points for the material conveyor ease service.

The CP75 has horizontal sliding damper doors that give the operator 10 inches of ground clearance below the auger box and allows for paving from 0 to 4 feet by closing the doors.

The High Flow Material Conveyor utilizes dual 35 1⁄2-inch heat- and oil-resistant rubberized belts fixed to chain-driven slats that transfers material to the augers without segregating the mix.

The EZC813 heated screed is standard, providing a paving width of 8 to 13 feet. Also available is the EZC815, which paves from 8 to 15 feet.

recent articles on Asphalt Paver - Tracked

The CP75 II paver has a Tier 4-Final Deutz 2.9 L4 engine the produces 192 lb.-ft. of torque at 1,600 rpm

The CP100 tracked asphalt paver has an 8.5-ton hopper and paves  from 8 feet to 15 feet with the Carlson EZC815 screed.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
CE-Asphalt Paver - Tracked
Overlay Init