Equipment Type

Lincoln Electric Tomahawk Plasma Cutter

Tomahawk 625 plasma cutting system is a new model in the line, designed for use on mild steel, stainless steel, aluminum, brass and copper.

July 15, 2011

Tomahawk 625 plasma cutting system is a new model in the line, designed for use on mild steel, stainless steel, aluminum, brass and copper. System operates on 208- or 230-volt single-phase 60 or 50 Hz input power to produce 10 to 40 amps output. It is rated at 40 amps at 96 volts, 35 percent duty cycle. Continuous output control focuses the arc for up to 1/2 inch recommended, 5/8 inch maximum and 3/4 inch severance cut thicknesses. Comes with standard LC40 plasma cutting torch, integrated water separator, air regulator and pressure gauge, cables, and shoulder strap. Touch Start system delivers plasma arc initiation without high frequency, and rapid arc restrike capability ensures users can quickly cut through gaps and expanded metal, according to the company.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init