Radmeister Dig and Grab Bucket

Sept. 28, 2010

Radmeister mounts four grapple arms with 5/8-inch-thick steel tines on a 20-inch-deep digging bucket with a 6-inch cutting edge of ¾-inch-thick manganese/chromium alloy. The Dig-and-Grab Bucket’s single grapple cylinder can open the tines 35 inches wide to dig normally with the bucket, or to get hold of big loads. The bucket’s standard quick-coupler mounts fit couplers on Bobcat 8/7 series loaders and machines with the same coupler. The Dig-and-Grab Bucket comes in 66-, 72- and 78-inch sizes.


 

Radmeister mounts four grapple arms with 5/8-inch-thick steel tines on a 20-inch-deep digging bucket with a 6-inch cutting edge of ¾-inch-thick manganese/chromium alloy. The Dig-and-Grab Bucket’s single grapple cylinder can open the tines 35 inches wide to dig normally with the bucket, or to get hold of big loads. The bucket’s standard quick-coupler mounts fit couplers on Bobcat 8/7 series loaders and machines with the same coupler. The Dig-and-Grab Bucket comes in 66-, 72- and 78-inch sizes.