Equipment Type

Wirtgen Makes 19 Milling Machines

In our June issue on page 46, six of the Wirtgen machine specifications were inadvertently placed at the end of the Roadtec product listing.

July 01, 2003

In our June issue on page 46, six of the Wirtgen machine specifications were inadvertently placed at the end of the Roadtec product listing. In addition, we have added Roadtec's latest model—the RX-500. Please see the chart below as it should have run. We regret the error.

Basic Specifications: Milling Machines
Manufacturer/Model Max. Width of Cut (in.) Max. Depth of Cut (in.) Crawler Or Wheel Gross Engine Power (hp) Working Speed (ft./min.) Operating Weight (lbs.)
Specifications shown here are based on information provided by Spec Check and are given here for comparison only. Specs are subject to change and manufacturers or their distributors should be contacted for the most current information. For specs on any equipment, visit Construction Equipment's website at www.ConstructionEquipment.com.
Roadtec
RX-10 12 6 WH 108 95 15,900
RX-20B 40 10 WH 230 264 32,440
RX-25 52 8 CR 250 12 42,000
RX-50B 98 12 CR 600 160 74,800
RX-60B 86 12 CR 750 160 91,800
RX-60C 150 12 CR 800 155 106,720
RX-68B 98 12 CR 750 160 109,000
RX-70B 150 8 CR 800 120 110,220
RX-500 86 13 CR 500 150 58,000
Wirtgen
1900 Combo 48 12 CR 400 102 51,000
1900 DC 86 12 CR 400 102 54,672
1900/52 52 12 CR 400 102 52,908
1900/60 60 12 CR 400 102 53,349
2100 DC 87 12 CR 601 130 77,000
W 1000 F 40 12 WH 248 108 38,140
W 1000 FT 40 12 CR 248 108 40,785
W 1000 L 40 10 WH 164 104 31,195
W 1000 R 40 10 WH 199 96 38,802
W 1200 F 48 12 WH 248 108 41,557
W 1200 FT 48 12 CR 248 108 44,203
W 1900 86 12 CR 430 116 54,850
W 2000 86 13 CR 565 180 65,131
W 2100 86 12 CR 630 275 82,010
W 2200 87 14 CR 860 275 101,851
W 2200/3.8 150 14 CR 860 180 110,550
W 350 14 4 WH 47 66 9,700
W 500 20 6 WH 105 66 16,314
W 600 24 12 WH 164 104 27,226


More like this

Comments on: "Wirtgen Makes 19 Milling Machines"

Subscribe Today

Enter your email address here to be automatically subscribed to our daily newsletter!

Overlay Init