Marine Construction Contractor Faces 15 Citations Following Crane Collapse

November 26, 2013

OSHA has cited Concavage Marine Construction Co. for willful and serious workplace safety violations following a May 22, 2013 crane collapse at the Avalon Bay Marina in Stamford, Conn. Proposed fines total $165,200.

The marine construction contractor, based in Fort Chester, N.Y., was hired to replace and repair storm-damaged pilings at the marina. While installing the pilings, the 80-foot boom of the barge-mounted crane fell over backward, bouncing off the stays of a sailboat and landing on top of a yacht.

OSHA's inspection found that the crane lacked boom stops and a boom hoist limiting device, necessary safety devices that would have prevented the boom from falling backward. The crane had not been inspected by someone who could have identified these and other hazards. These hazards resulted in two willful citations carrying $98,000 in fines.

"This crane should not have been operating. Not only did it lack required safety devices, it had not been inspected for these and other defects that should have been corrected before the crane began operating. The employer deliberately failed to adhere to basic crane safety standards, putting at risk the lives of its employees and anyone else in the vicinity," said Robert Kowalski, OSHA's area director in Bridgeport, Conn.

Fourteen serious citations, with $67,200 in fines, involve hazards related to the set up, operation and maintenance of the crane and barge, including failing to conduct additional, required daily, monthly and annual inspections of the crane, the barge and the crane's wire lifting ropes; ensure that load charts with the crane's correct lifting capacity were in the crane; reduce the crane's rated lifting capacity to account for operating on the barge; ensure that the cabling system used to secure the crane to the barge is sufficiently sized and strong to support the crane's load; ensure that the barge was structurally sufficient; and erect control lines or railing to mark the crane's swing/crush zone.

Concavage Marine Construction has 15 business days from receipt of its citations and proposed penalties to comply, meet informally with OSHA's area director or contest the findings before the independent Occupational Safety and Health Review Commission.