Equipment Type

Bomag BM-35 Milling Machines

Three models have been introduced in the BM-35 series of milling machines, which have been redesigned with the milling rotors in the rear.

March 04, 2014

Three models have been introduced in the BM-35 series of milling machines, which have been redesigned with the milling rotors in the rear. The lineup includes models BM 1000-35, 1200-35 and 1300-35. Cutting tool life has been extended by minimizing tool replacement labor (see video). The cutting system uses a single bolt for holder retention and requires 75 lb.-ft. of tightening torque. Low front face position increases efficiency and overall milling power, the company says, while allowing full-tooth rotation.

The series also has a remodeled operator station, which has a vibration-isolated stand with swivel seat that allows all work to be done while seated. Straight forward switches, levers and clear read out displays enhance ergonomics.

other Bomag Americas, Inc. products

BOMAG BW 124-5 single-drum vibratory rollers have a 47.2-inch drum width and a turning radius of 88.2 inches.

The new generation of compact BW 124-5 single-drum vibratory rollers, available in both smooth (BW 124 DH-5) and pad-foot (BW 124 PDH-5) drum configurations, have a 47.2-inch drum width and a turning radius of 88.2 inches.

BOMAG BW 138 AD-5 tandem vibratory roller has a 54.3-inch rolling width and is suitable for use on granular soils and asphalt.

The BW 138 AD-5 tandem vibratory roller, designed with a large drum diameter and high compaction forces, has a 54.3-inch rolling width and is suitable for use on granular soils and asphalt.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
CE-Paving & Materials Production,CE-Cold Planers and Milling Machines,CE-2014,CE-Paving & Compacting,CE-2014,CE-Paving and Compacting
Overlay Init