Equipment Type

Morbark

The 1600 tub grinder is capable of grinding 10-foot stumps with a 6-foot hammermill.

July 01, 2006

Morbark 1600 tub grinderThe 1600 tub grinder is capable of grinding 10-foot stumps with a 6-foot hammermill. The base diameter is 11 feet 2 inches with a tub capacity of 20 cubic yards. It can be fed using a 13-cubic-yard bucket, the company says. The discharge system has a 60-inch belt. Standard three-auger system eliminates damage from steel contamination and provides for a pressure sensor that stops the tub if overloaded.

recent articles on Tub Grinders

  • Morbark combines heavy-duty construction and new technology in the 1300B tracked tub grinder

  • The all-new TG5000 tub grinder features a 60-inch-deep and 12-foot-wide tub opening. Vermeer says the bottom of the tub flares outward from the tub wall, allowing the hammermill to cut under the vertical wall of the tub, helping to reduce bridging and permitting steady feeding of material.

More like this

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Image CAPTCHA
Enter the characters shown in the image.
Overlay Init