The D36X50R MAGnum magnetic hammer drilling system uses rapidly rotating magnets of alternating polarity within the carriage assembly to create a high frequency percussive action.
The D36X50R MAGnum magnetic hammer drilling system uses rapidly rotating magnets of alternating polarity within the carriage assembly to create a high frequency percussive action that fractures and bores through solid rock. The push created by the magnet’s two north poles is repeated thousands of times and amplified to make the percussive action. The MAGnum drilling system does not require specialty drill rods nor auxiliary support such as an air compressor. At the flip of a switch, the MAGnum system can be disengaged and perform as a conventional HDD drill. The MAGnum drilling system was developed in collaboration with FlexiDRILL of New Zealand, is licensed for exclusive distribution by Vermeer.
Tweet
Vermeer RTX250 rubber-tracked, steerable trencher has a 27-horsepower Kohler electronic fuel injected gas engine.
Hole Hammer pneumatic piercing tool features a moving-head design that provides full striking force of the piston to the head of the tool, pulverizing stones into the surrounding soil.
The T880’s cab is 8 inches wider and the hood’s sculpted lines are smoother than what have been seen for 27 years on T800 trucks, like those at right. New complex-reflector headlamps are flush with fenders and use inexpensive halogen bulbs. As with all T-series Kenworths, the 880 has a setback steer axle.
