Vermeer D20x22FX Series II flex-angle drill is designed specifically to assist with geothermal field loop installations.
Vermeer D20x22FX Series II flex-angle drill is designed specifically to assist with geothermal field loop installations. Unit can drill at any specified angle ranging from 18 to 90 degrees. Unit is also a fully functioning horizontal directional drill that can install horizontal loops as well as conventional utilities. Automated rod loader is modeled after a conventional HDD rod loader with modifications to operate at the fully vertical position. The auto-drill feature allows the operator to set thrust/pullback speed, pressure or rotation modes and revert back to original setting with the simple push of a button. The machine measures 65 inches (165.1 cm) wide, for maneuverability in confined spaces. Drilling fluid pump is rated at a maximum of 25 gpm (94.6 L).
The D24x40 Navigator horizontal directional drill has 28,000 pounds of thrust and pullback and 4,200 lb.-ft. of rotational torque.
The D40x55 S3 Navigator horizontal directional drill has 40,000 pounds of thrust/pullback and 5500 lb.-ft. of rotational torque