Equipment Type

Topcon Wheel Loader Control

Topcon Positioning Systems has added a wheel loader machine control package to its 3D-MC lineup.

January 31, 2011

Topcon Positioning Systems has added a wheel loader machine control package to its 3D-MC lineup. Unit combines Topcon’s dual mast GPS system with three TS-1 tilt sensors: GX-60 control box, MC-R3 receiver, plus two MC-G3 GPS antennas. Optional light bars are available for enhanced elevation and steering control.

 
 

recent articles on Electronic Grade Controls, GPS and Laser

  • Topcon Positioning Group has announced advances to its P-32 asphalt paving system with new components including the ST-3 sonic tracker, anti-vibration slope sensor, and a firmware update to the full-color, graphic display GC-35 control box.

  • The Leica iCON grade iGD4SP dozer solution calculates the lift, angle, and tilt of a dozer’s six-way blade, allowing the operator to angle the blade, while the system’s advanced hydraulic interface automatically controls lift and tilt.

Topcon Positioning Group has announced the addition of Siteview technology to its Sitelink3D job site management solution.

A new data controller from Topcon Positioning Group, the FC-500, features a large 4.3-inch touch-screen display and 5MP camera with built-in LED flash.

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video