Equipment Type

Thermal Arc 201TS DC TIG/Stick Welder

Thermadyne's 21.6-pound Thermal Arc 201TS DC TIG/Stick welder has a 10 to 200-amp output and the flexibility to use 120 to 230 volts primary power.

April 27, 2011

Thermadyne's 21.6-pound Thermal Arc 201TS DC TIG/Stick welder has a 10 to 200-amp output and the flexibility to use 120 to 230 volts primary power. According to Thermadyne, the 201TS in Stick mode automatically provides an optimized hot start for consistently positive arc starts. An adjustable arc-force control enables the operator to adjust arc characteristics from “soft” to “driving” in order to accommodate different electrodes and applications. For DC TIG welding, the 201TS provides Lift TIG and HF TIG arc starts. Designed for professional welders, the 201TS offers 2T/4T trigger switch/hold functions, a down-slope timer (that ramps down current at the end of the weld), built-in gas solenoid valve, 8-pin amphenol connector and an optional remote foot control.

 
 

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video