Terex Hi-Ranger LTM Series insulated, articulating, telescopic material handling aerial device, says the manufacturer, provides high reach in a compact design.
Terex Hi-Ranger LTM Series insulated, articulating, telescopic material handling aerial device, says the manufacturer, provides high reach in a compact design. With a working height of up to 44.5 feet, the LTM40 model has100 inches of upper boom extension for high reach capability. With a gross vehicle weight rating of 19,500 pounds, the LTM40 can be installed on a Class-4 chassis with 7,000-pound front axle; a CDL is not required to operate this utility vehicle. The lower boom travels -5 to 90 degrees, and the upper boom has a trajectory of -20 to 80 degrees. The LTM40 has a platform capacity up to 400 pounds, a horizontal reach of 30.7 feet, and offers up to 200 pounds jib capacity at full side reach.
Overcenter aerial devices have been redesigned with a longitudinal hydraulic lift option to provide up to 75 feet of working height
Hi-Ranger NT35 and NT38 non-insulated, telescopic articulating aerial devices provide fully proportional, electric-over-hydraulic platform controls that allow for smooth multi-functional operation.
Terex Texoma spiral bullet tooth auger has a cut pattern and tooth attack angle that combine to make the bullet teeth act like "fingers" that penetrate through and lift up fractured or broken material.
The R265T compact track loader has a 74-horsepower Tier 4-Final engine.