Godwin Vac-Prime 4-inch and 6-inch dewatering pump models can manage heads of 36 to 82 feet, flows of 13,000 cubic feet per hour, and solids handling up to 2.95 inches.
Thompson Pump’s 6-inch, high-head 6JCC pump delivers 1,100 gpm, high heads to 490 feet, and 212 psi with automatic initial priming and re-priming to handle clear water jetting, water boosting, wellpoint installation, water supply for hydraulic fracturing, washdowns, tank cleaning, and fire protection.
Griffin electric submersible pumps are available for flows as low as a few gpm to several hundred gpm, with head conditions from a few feet to several hundred feet.
Griffin wellpoint pipe puller grabs the inside of the pipe wall below the threaded section of pipe or the joint of PVC pipe for the removal of the installed wellpoint.
Griffin wellpoints are available with 1.5- or 2-inch PVC or stainless steel screen.
The T880’s cab is 8 inches wider and the hood’s sculpted lines are smoother than what have been seen for 27 years on T800 trucks, like those at right. New complex-reflector headlamps are flush with fenders and use inexpensive halogen bulbs. As with all T-series Kenworths, the 880 has a setback steer axle.
