Equipment Type

Nye DR3 Ripper

Independently-adjustable shanks allow dozer operators to shorten or lengthen the shanks on the DR3 "triple" ripper from Nye Manufacturing as required.

December 01, 2008

Independently-adjustable shanks offering three positions each allow dozer operators to, as needed, shorten or lengthen the shanks on the DR3 "triple" ripper from Nye Manufacturing. The three-inch-thick steel shanks can be angled past the vertical in either direction, providing for the optimum ripping angle. Built entirely from extra-thick 44W steel, the DR3 ripper features a fully-enclosed box design engineered for strength. The eyes penetrate into the box section, allowing greater resistance to twisting loads. Coming with the customer’s choice of teeth and shank protectors, the DR3 is the newest addition to Nye’s growing family of attachments for dozers.

 
 

recent articles on Rippers

  • Anbo Manufacturing says its Extractor is designed to dig up large rocks and stumps with the least amount of force or soil disturbance.

  • Designed to work in compacted soil, shale, limestone rock and coal, Bron offers the 4000 vibratory ripper for dozers up to 1,200 horsepower.

other Nye Manufacturing Ltd. products

Nye

Originally conceived for ripping shale in the Canadian Maritimes, Nye Manufacturing's Mother Of All Rippers (MOAR) excavator attachments are built with additional steel plates.

Independently-adjustable shanks allow dozer operators to shorten or lengthen the shanks on the DR3 "triple" ripper from Nye Manufacturing as required.

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video