Equipment Type

Lincoln Electric Tomahawk 375 Air Plasma Cutter

Designed for on-site maintenance, the Tomahawk 375 Air plasma cutting system cuts mild steel, stainless steel and aluminum.

April 18, 2011

Designed for on-site maintenance, the Tomahawk 375 Air plasma cutting system cuts mild steel, stainless steel and aluminum. It includes an internal air compressor and can be used anywhere 208- or 230-volt, single-phase 60 Hz power is available. The unit provides continuous output control to focus the plasma arc for up to 5/16-inch recommended, 3/8-inch maximum, and ½-inch severance cut thicknesses, the company says. It produces 10 to 25 amps output and is rated at 25 amps at 90 volts.

 
 

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video