IMT says 17 of its 22 articulating cranes are new or improved, with lift capacities ranging from 1,740 to 35,405 pounds.
IMT says 17 of its 22 articulating cranes are new or improved, with lift capacities ranging from 1,740 to 35,405 pounds. Eight mid-range cranes have been introduced with single- or double-link configurations, offering many options for specific lifting needs. A new "over-bending" feature provides more flexibility when working through narrow passages and under power lines, ability to lift maximum loads in all boom positions, and a lower stowed height on the truck body. An important safety feature, Rated Capacity Limiter, is available on all cranes.
Currently prototyped for the Ford Transit 250 Mid-Roof, the Venturo Van Crane features a horizontally articulated jib boom to reach deep within the van with a capacity of 1,000 pounds at maximum reach.
The TC Series is a new line of hydraulic cranes incorporating a tall mast telescoping crane commonly referred to as a “T-Boom” crane.
The hydraulic-driven IMT CAS80R rotary screw air compressor offers 33 percent more air output than the previous model—up to 80 cfm at 150 psi—at a similar price point.
Model 28562 has been added to Iowa Mold Tooling’s hydraulic loader line and has the highest rating at 161,490 lb.-ft.