FX Series breakers feature a mono-block design, and with only two moving parts, hammer operation is simplified and the chance of downtime is reduced.
FX Series breakers feature a mono-block design, and with only two moving parts, hammer operation is simplified and the chance of downtime is reduced. The advanced hydraulic circuit provides increased flow to the valve and piston, resulting in faster cycle times, increased tool penetration, and more productivity per hour than predecessor models. According to the company, there are no Through-Bolts to constantly torque or replace, and the front wear bushing is easily replaced, so the hammer is always in perfect working condition. It offers a wider oil flow range, allowing for faster striking speeds and the ability to be used on a wider range of carriers.
Tweet
FX Series breakers feature a mono-block design, and with only two moving parts, hammer operation is simplified and the chance of downtime is reduced.
Powered by a 440-horsepower Tier III Cat engine, DCR20 down-the-hole drills have been used in soft, medium and hard rock conditions providing deep holes from 3.5 to 6.5 inches in diameter.
