Equipment Type

Ditch Witch 910T Locating Transmitter

910T electronic locating transmitter applies a controlled signal to metallic pipes and cables, and it is designed for use with the Ditch Witch 910R receiver.

October 12, 2010

The 910T electronic locating transmitter applies a controlled signal to metallic pipes and cables, and it is designed for use with the Ditch Witch 910R receiver. It transmits via direct-line connection, induction clamp, or induced broadcast signals to locate buried cable, CATV, power, gas and water lines. Up to three frequencies come standard, factory-set when ordered, and more can be added. Available frequencies are: 512 Hz, 1 kHz, 8 kHz, 29 kHz and 80 kHz.

 
 

recent articles on Pipe & Cable Locators

  • Ditch Witch 2450GR Ground Penetrating Radar uses radar pulses to image the subsurface and is designed to detect metallic and non-metallic pipes and cables to depths of up to 19.7 feet in a variety of ground conditions— including rock, soil and pavement.

  • The 830R/T (receiver/transmitter) system is designed to provide best performance at a high active frequency to identify and trace metallic pipe or cable, water, and gas distribution lines.

other Ditch Witch products

The RT100 ride-on trencher has a Tier 4-Interim, 100-horsepower Deutz engine.

Two horizontal direction drills, the JT60 and JT60 All Terrain, fill the gap between the 40,000- and 100,000-pound offerings.

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video