Cold Planers & Milling Machines
COLD PLANERS & MILLING MACHINES Product Reviews
The new BM 1300/30-2 Center Rotor milling machine is the latest addition to BOMAG’s milling machine family.
Wirtgen W 210 asphalt cold-milling machine can be equipped with milling drum assemblies of 59-, 79- or 87-inch working width.
Wirtgen W 200 asphalt cold-milling machine can be equipped with milling drum assemblies of 59-, 79- or 87-inch working widths.
New generation compact cold planers have more power and improved operator efficiency, according to Dynapac.
A C27 Tier-2 diesel engine powers Terex Roadbuilding's PR950B half/full lane milling machine. The engine, rated at 947 horsepower at 1,800 rpm, along...
A new grade and slope control automation system designed specifically for cold planers is available for the Roadtec RX-500, RX-700 and RX-900...
Cutter-drum design changes provide users of Roadtec's cold planers with a milling pattern that enhances the bonding of the new asphalt layer to the...
Kennametal says its new road-ready milling drums are designed to increase efficiency and reduce equipment wear via computer-engineered designs that...
- 1 of 4
- ››
Articles On COLD PLANERS & MILLING MACHINES
When Mn/DOT closed the entire eastbound lanes at 10 p.m. on Friday, Hardrives brought in its new Wirtgen W2200 full lane milling machine, which covers more area than the half-lane machines.
Similar to the oil crisis of the 1970s, recent exorbitant oil prices have had a profound impact on the price of liquid asphalt (AC). Current AC prices have reached $800 per ton in some regions. "Paying $800 for binder results in mix prices of...
In an economy which has seen the housing market collapse and many construction contractors pull up stakes, Posen Construction, Inc., has not just survived but thrived. The company's formula for success is a diverse offering combining in-house...
While there have been many recent technological advancements in hot mix asphalt (HMA) surfacing and resurfacing projects, very few things have ever had the impact of an old-fashioned, clean, tight, bond between asphalt lifts on a roadway's longevity...
Reconstruction of a 2,200-foot section of Collins Road north of Jolly Road in Lansing includes milling, cutting out the subgrade and replacing it with new sand and gravel, replacing catch basins, placing curbs, and paving with asphalt. Collins road...
An upgrade of an approximately 1-1/2-mile section of 12 Mile Road between Gratiot and Harper in Roseville and St. Clair Shores includes milling off the existing asphalt down to a concrete surface, doing concrete repairs and joint repairs, and then...
A 2-1/2-mile section of Cass Avenue in Macomb County that is currently a two-lane asphalt road is being reconstructed into a five-lane concrete road with two roundabouts, one at 19 Mile Road and another one at Romeo Plank Road. Six-S Inc., of...
Given America's progressively aging infrastructure, cold milling machines are being used more and more on today's paving projects. Whether it's a city street that's been overlaid once too often, under-road utilities that are well beyond their 30-...
Volvo Construction Equipment introduced a new class of milling machines, the Volvo MT2000 and MW500. Originally developed by Ingersoll Rand, the two units round out Volvo's road machinery product line. The MT2000 features a four-track, front-load,...
Cavaliere's move into full-service milling required more machines for the work
- 1 of 2
- ››