Bomag Cedarapids CR552 wheeled asphalt paver carries up to 27 tons of material.
Bomag Cedarapids CR552 wheeled asphalt paver carries up to 27 tons of material. The 260-horsepower engine meets Tier 4-Interim standards, and it varies the fuel stream to use only what is necessary for the applications, according to Bomag. A heavy-duty rear drive motor provides draw-bar pull. The exclusive Frame Raise System raises and lowers the rear of the paver, which allows the operator to fine-tune the head of material at the spreading augers, reducing segregation. By isolating the frame from the drive system, Three-Point Suspension essentially “floats” the pavers over subbase irregularities, maintaining consistent material feed height at the screed, the company says. Depending on screed, the machine paves up to 30 feet at 12 inches deep.
Operating weight, tractor: 33,470 pounds
Paver width: 124 inches
Paving width, max: 30 feet
Paving depth, max: 12 inches
Paving speed, max: 313 feet per minute
Engine: Cummins QSB6.7, Tier 4-I
Power: 260 horsepower @ 2,200 rpm
Hopper capacity: 16.7 tons
Hopper volume: 267 cubic yards
Volvo P7110 tracked and P7170 wheeled asphalt pavers have been upgraded to Tier 4-Interim compliance with 235-horsepower Volvo D8 engines.
Vision i-Series pavers include the tracked Vision 5200-2i and wheeled Vision 5203-2i.