Cat 994H wheel loader has four loader linkage configurations that allow users to tailor the machine to various mining applications.
Cat 994H wheel loader has four loader linkage configurations that allow users to tailor the machine to various mining applications. It has a 1,463-horsepower Cat 3516B HD engine, operating weight of 431,000 pounds, and dump clearances from 19.2 feet to 23.3 feet. Bucket capacities range from 19.5 to 47 cubic yards. Lift configurations include standard, high lift, extended high lift, and super high lift. Cat planetary powershift transmission is specifically designed for mining applications, and an integral Impeller Clutch Torque Converter and Rimpull Control System allow the operator to precisely adjust power at the wheel by modulating rimpull from 100 to 25 percent. Positive Flow Control hydraulic system uses four electronically controlled, variable-displacement pumps that deliver up to 38 gpm at a main relief pressure of 4,750 psi. The Steering and Transmission Integrated Control System combines control of travel direction, steering and gear selection in a single controller. The unit has a rear-vision camera system as standard, with a radar-based object-detection system also available. The Vital Information Management System assesses machine performance in real time, including on-the-go weighing; payload recordkeeping; and performance analysis such as utilization, cycle time, and fuel usage.
Tweet
Pro Series hydraulic thumbs for Cat hydraulic excavators in the 311 through 329 model range mount on the bucket pin and move along the same arc as the bucket edge.
Demolition and sorting grapple lineup includes five models designed to fit a broad range of Cat hydraulic excavators, both crawler- and wheel-type, with operating weights from 22,000 to 99,200 pounds.
John Deere PowerTech PWL T4-F technology.
