Bobcat Rebar Bender

Mounted on the left Bob-Tach mount, the Bobcat rebar bender attachment comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added efficiency and consistency, the company says.

Feb. 18, 2013

Mounted on the left Bob-Tach mount, the Bobcat rebar bender attachment comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added efficiency and consistency, the company says.

Rebar up to a #6 grade can be bent up to 200 degrees, and the remote attachment control allows for operation of the rebar bender from outside the cab, and allows operators to start and stop their idled loader or Toolcat utility work machine from outside the cab. The wired remote control starts and stops the rotation of the bend pin. An optional bar stop is available that can be set at almost any angle for an automatic stop, and a repeatable angle setting. Compatible machines for the rebar attachment include all Bobcat skid-steer loaders and CTLs.

Request More Information

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.