Equipment Type

Blastcrete MX-10 Concrete Pump

MX-10 concrete mixer/pump handles up to 2,500 pounds of material.

April 18, 2014

MX-10 concrete mixer/pump handles up to 2,500 pounds of material. A closed-loop hydraulic circuit enables the unit to mix dense refractory materials in less than two minutes, the company says. The 3-inch swing tube piston pump operates with up to 2,200 psi to install up to 12 tons of material per hour. The electrical controls are mounted on the 22-square-foot platform and positioned away from the mixer to remain free from debris and water. The unit is mounted on dual 7,000-pound capacity axles, and lifting eyes on the platform allow operators to use a crane to lift the machine and place it on a flatbed for traveling longer distances. Optional skid-mounted framework reduces the overall length, width and height of the machine. Engine options include John Deere 4045T 99-horsepower or Deutz BF4M 2012 102-horsepower water-cooled diesels, as well as electric motors.

 
 

recent articles on Concrete Pumps

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video