Equipment Type

Atlas Copco FlexiROC T30 R Drill Rig

FlexiROC T30 R radio remote-control tophammer drill rig comes with either a COP 1240 or 1640 drill for 2- to 3.5-inch holes.

March 28, 2013

FlexiROC T30 R radio remote-control tophammer drill rig comes with either a COP 1240 or 1640 drill for 2- to 3.5-inch holes. The standard hydraulic carousel-type rod handling system uses 12-foot rods. The carousel carries four rods for a maximum drilling depth of 57 feet. A Cummins QSB4.5 turbocharged engine meets Tier 4-Interim requirements. The drill has extended boom coverage of 14 feet through an 80-degree radius. Radio remote control comes standard, allowing the operator full control of drilling, tramming and boom controls from a safe working distance on confined sites or unstable terrain.

 
 

recent articles on Surface drills

Atlas Copco’s Dynapac CT3000 tamping compactor is designed for large-volume work on cohesive and semi-cohesive soils.

The Hydro Magnet, designed to separate iron and steel from concrete waste for subsequent recycling, can be installed on a carrier with an existing uni-directional auxiliary circuit with a signal line to power and control the magnet, so there is no need for a generator or electric cables from the carrier. 

Add comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

SUBSCRIBE TO OUR NEWSLETTERS

Optional
Optional
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Featured Video